Multi-Head Pick-and-Place Chuck Capping

Four-Head Pick-and-Place Chuck Capping Machine

Four pneumatic pick-and-place chuck capping heads for higher-output lines using flat round caps.

View Running VideoGet A ProposalSend Bottle & Product DetailsView Specifications
Home/Capping Machines/Four-Head Pick-and-Place Chuck Capping Machine
Machine Overview

Four Capping Heads For Higher Sustained Output

Four-head pick-and-place chuck capping machine with safety enclosure and cap elevator
Multi-Head Pick-and-Place Chuck Capping

Parallel cap handling for flat round closures

The machine uses four pneumatic gripping heads to pick, place and cap suitable flat round closures. Cap sorting, cap separation, bottle clamping and conveyor timing are engineered around the actual bottle and cap samples.

50–60 bottles/min4 capping headsPneumatic grippingAutomatic cap feeding
Application Boundary

Suitable Applications And Important Limits

Suitable For

  • Cream jars with suitable flat round caps
  • Daily toiletry bottles
  • Beverage bottles
  • Lines requiring four-head parallel capping

Confirm Another Configuration For

  • Closures that cannot be reliably oriented
  • Irregular caps without sample testing
  • Unsupported soft containers
  • Press-fit closures requiring a press capper
Real Machine Video

Four-Head Pick-and-Place Chuck Capping Machine Running Test

Four-Head Pick-and-Place Chuck Capping Machine Running Test

Real machine footage showing four-head cap pickup, placement and automatic inline capping.

Open Running Video →
Verified Specifications

Four-Head Machine Specification

Specifications below are based on the supplied machine configuration. Bottle, closure and product samples are reviewed before final engineering confirmation.

Four-head pick-and-place chuck capping machine with safety enclosure and cap elevator

Four-Head Pick-and-Place Chuck Capping Machine

4-Head Pick-and-Place
Bottle SizeΦ30–200 mm / H100–300 mm
Cap DiameterΦ22–110 mm
Speed50–60 Bottles/Min
Heads4

Closure Handling

Cap TypeFlat round caps
CappingPneumatic gripper pick-and-place
Cap SeparationServo-driven cap hooking/separation
Cap FeedingElevator sorter; cap loader optional

Controls & Utilities

ControlPLC + touchscreen
Voltage380 V / 3 phase / 50–60 Hz
PowerApprox. 3.5 kW
Air0.6–0.8 MPa

Machine

ApplicationsCream jars, toiletry and beverage bottles
WeightApprox. 800 kg
Construction304 stainless steel and anodized aluminum
FunctionsBottle clamping, conveying and capping
Working Process

How Four-Head Pick-and-Place Chuck Capping Works

Step 01Bottle infeed
Step 02Cap elevator
Step 03Cap separation
Step 04Four-head pickup
Step 05Cap placement
Step 06Bottle discharge
Buyer Questions

Frequently Asked Questions

Do you need cap and bottle samples?

Yes. Actual bottle, cap and liner samples are required to confirm gripping, placement, torque and changeover parts.

Can the machine connect to an existing line?

Yes, subject to a line compatibility check. Share the conveyor height and direction, the spacing between incoming bottles, and the actual speeds of the equipment before and after the capper. Test with your bottles and caps at the target line speed to check that bottles feed smoothly and that cap feeding, placement, and tightening keep pace. The capper’s rated speed alone does not establish the output of the full line.

Can it handle every cap shape?

No. Cap geometry, stiffness and center of gravity determine whether pick-and-place handling is suitable.

Engineering Review

Send Your Product, Container And Closure Details

We will review the product behavior, container dimensions, closure geometry, target output and factory conditions before recommending the final configuration.

Request A ProposalDownload Family Datasheet