Double Side Labeling

Double Side Labeling Machine For Front And Back Bottle Labels

Automatic labeling solution for flat, square and suitable shaped bottles that require front and back labels or another two-label layout.

Get A Quote Send Bottle & Label Details View Configurations Download Datasheet

Machine Overview

What Is This Machine Used For?

Double Side Labeling

Front and back labeling for flat and square bottle packaging

A double side labeling machine applies front and back labels to flat, square and suitable shaped bottles. Container geometry and label layout are confirmed before configuration.

Front + Back LabelsFlat / Square BottlesPosition ControlCustom Layout

Front And Back Label Compatibility

Paired Front And Back Label Examples

These examples show stable bottles with separate front and back label panels. Each product requires two labels with matched positioning.

Personal care, cosmetic, daily chemical, cleaning and chemical bottles with paired blank front and back labels — Actual container geometry, front and rear panel position, label size, material and registration requirement determine bottle alignment and both labeling-head settings.

Personal Care BottleTall front and back labels

Square Cosmetic BottleMatched square label pair

Daily Chemical BottleShaped front and rear panels

Cleaning Product BottleContoured label pair

Chemical BottleOval front and back labels

Bottle And Label Compatibility

Suitable And Not Recommended Bottles

Suitable Bottles

Flat bottles requiring front and back labels
Square bottles
Cosmetic bottles after requirement confirmation
Personal care bottles
Suitable shaped bottles with a two-label layout

Not Recommended For

Simple single wrap labels
Round bottles requiring simple wrap-around labeling
Bottom label applications
Shrink sleeve labels
Unstable round bottles without positioning

Machine Configurations

Double Side Labeling Configurations

Double Side Labeling Machine

Roll-on labeling

Bottle TypeRound / square bottles

Label SizeWidth 20-200mm, length 20-500mm

Speed60 Bottles/Min

Accuracy±2mm

Labeling Features

MethodRoll-on labeling

Label SizeWidth 20-200mm, length 20-500mm

Roll Inner Dia.Ø76mm

Roll Outer Dia.Ø300mm

CodingOptional

Bottle & Application

Bottle TypeRound / square bottles

IndustryFood & beverage, daily chemical & personal care, alcohol products

Suitable ContainersShampoo / shower gel plastic bottles, cosmetic flat glass bottles

Machine Specification

AutomationFully automatic

Machine304 stainless steel

Voltage380V

Power2.2 kW

Air Pressure0.6-0.8 MPa

Size3000 x 1800 x 1800mm

CustomizationYes

Configuration Logic

What Should Be Confirmed Before Selection?

Same Core Structure

Dual label application concept
Bottle positioning requirement
Label peeling and pressing
PLC control
Custom tooling capability

Need To Confirm

Label position relation
Bottle orientation feature
Label size and spacing
Required speed
Need for sensor positioning

Bottle And Label Matching

Recommended Bottle Types And Label Connection

Recommended Bottle Types

Flat bottles
Square bottles
Cosmetic containers with front and back labels
Personal care bottles
Shampoo and shower-gel bottles
Suitable shaped containers with a two-label layout

Bottle / Label Matching Notes

Bottle Or Label Type	Recommended Labeling Structure
Round bottles	Wrap-around or positioning labeling
Flat bottles	Single side or double side labeling
Square bottles	Front/back labeling with guides
Bottom label	Bottom conveyor and label applicator
Shrink sleeve	Sleeve labeling and shrink tunnel

Working Process

How The Double Side Labeling Machine Works

Step 01Bottle feeding

Step 02Bottle orientation

Step 03Label position detection

Step 04First label application

Step 05Second label application

Step 06Label pressing

Step 07Bottle output

Step 08Line connection

The labeling machine can work as a standalone labeling unit, or connect with filling, capping, coding and collecting systems to build a complete packaging line.

Labeling Method Value

Why Choose Double Side Labeling?

Main Advantages

Supports front and back labeling on flat and square bottles
Better for special label positions
Can be customized by sample
Improves label alignment consistency

Production Benefits

Useful for cosmetic and personal care packaging
Can connect with automatic lines
Helps reduce manual label placement
Supports more complex label layouts

Method Comparison

Comparison With Other Labeling Methods

Labeling Method	Best For	Selection Note
Round Bottle Labeling	Round bottles and wrap-around labels	Best for cylindrical bottles
Flat Bottle Labeling	Flat bottles and front/back labels	Best for flat or square containers
Double Side Labeling	Front and back labels on flat or square bottles	Best when two label faces must be applied in one process
Bottom Labeling	Bottom surface label placement	Best for product identification labels
Sleeve Labeling	Shrink sleeve and full-body packaging	Best for full wrap visual packaging
Star Wheel Round Bottle Labeling	Higher-speed round bottle handling	Best for stable bottle transfer and positioning

Real Machine Video

Real Double-side Labeling Machine Video

Machine Test Video

Double-side Labeling Machine Running Video

View the real machine applying labels to supplied container formats.

After the initial engineering review

What You Receive Before Final Configuration

Start with photos, dimensions, product behavior, filling volume and target output for your Double Side Labeling Machine For Front And Back Bottle Labels. Physical containers, closures, labels or product are requested later only when tooling or factory testing requires them.

Send Project Details View Information Checklist

Recommended configurationMachine type, head or station quantity and required options.
Preliminary layoutMachine sequence, interfaces, footprint and utility assumptions.
Written quotationConfirmed scope, available options, exclusions and commercial terms.
Test requirement listWhich physical items must be sent later for tooling and FAT, only when required.

Engineering Definitions

How To Read The Published Double Side Labeling Machine For Front And Back Bottle Labels Parameters

The website helps shortlist a machine. Final values are released only after the product, container, closure or label, required output and factory conditions are reviewed.

Container range

Bottle diameter, height, stability and orientation are checked with actual formats before the guide system is released.

Label range

Label size, roll direction, gap, backing paper and required position are confirmed from drawings or a physical roll.

Speed basis

A sustained bottles-per-minute target depends on container handling, label length, sensor response and line conditions.

Position result

Position tolerance, appearance, missing-label response and inspection method are agreed for the project FAT.

Final handover package

After configuration confirmation, the handover package supports installation, operation, maintenance and acceptance without publishing unconfirmed project values.

Approved general arrangement or layout
English operation manual
Electrical diagram
Pneumatic diagram where applicable
PLC program backup
Agreed FAT criteria and record
Operation training
Recommended spare-parts list

1 yearWarranty

Within 2 hoursOnline response

Remote + onsiteCommissioning options

Within 7 daysCommon spares dispatch

Download Engineering Datasheet Review Factory Acceptance Review engineering evidence

FAQ

Common Questions Before Buying

When is this machine needed?

It is used when flat, square or suitable shaped bottles require front and back labels or another controlled two-label layout.

Can standard round labeling do this?

Simple wrap labels use a standard round-bottle labeler; front and back labels normally require a double-side configuration.

Do you need bottle samples?

Yes. Bottle orientation and label layout must be confirmed.

Can it connect with filling and capping?

Yes. It can be integrated into a complete line.

Can label position be customized?

Yes, depending on bottle features and sensor configuration.

Back To Labeling Machines Send Inquiry

Buyer Selection Guide

Double Side Labeling Machine Selection Answers For Buyers

Best Used For

Flat bottles, square bottles, detergent bottles, shampoo bottles, personal care bottles and selected round bottle applications after testing.

When To Choose It

Choose it when the bottle requires front and back labels and the buyer wants both labels applied in one automatic process.

Not Recommended For

Not recommended for unstable, soft or irregular bottles without positioning fixtures and sample testing.

Before Quotation

Bottle dimensions, front label size, back label size, label roll direction, labeling position, bottle material and target speed.