Layout release
Power, compressed air, line direction, conveyor height, operator access and available footprint are confirmed before the general arrangement is approved.
Application Guide
Lotion Filling Capping Line
Lotion filling lines need stable dosing, anti-drip nozzles and cap handling matched with pump heads, screw caps or customized closures.
Direct Answer
Recommended Machine Selection
Recommendation: For lotion bottles, servo piston filling is usually preferred for viscosity control. If the bottle uses pump heads, the line should include pump head feeding, placing and capping equipment rather than a normal screw capping setup.
Body
Body lotion, cream lotion and gel products
Pump
Pump bottle or screw cap bottle packaging
Personal
Personal care and cosmetic manufacturers
Lines
Lines requiring filling, pump head placing, capping and labeling
Configuration
Machine Configuration Checklist
Use this table to confirm the main configuration before requesting a quotation.
| Area | Recommended Choice | Why It Matters |
|---|---|---|
| Filling | Servo piston filling | Handles lotion viscosity and supports anti-drip filling |
| Cap Handling | Pump head feeding and placing or screw capping | Selected by actual cap sample |
| Bottle Type | Round or flat pump bottles | Bottle stability affects conveyor and capping design |
| Labeling | Round bottle or flat bottle labeling | Selected by bottle shape and label position |
Not Recommended
Check These Limits Before Selection
- Very thick paste without sample testing
- Pump heads that cannot be oriented by automatic feeding equipment
- Frequent product changeover without cleaning plan
Before Quotation
Please provide bottle size, bottle shape, cap type, liquid property, filling volume, label size, target speed and factory voltage. Photos or samples help engineers confirm the machine structure faster.
Send Bottle DetailsBuyer Questions
Buyer Questions
What is the best filling method for lotion?
Servo piston filling is commonly selected because lotion is usually medium-to-high viscosity.
Can pump heads be automatically placed?
Yes, pump head feeding and placing can be customized when the pump head design is suitable for automatic orientation.
Can the machine handle different bottle sizes?
Yes, within the adjustable range. Bottle height, bottle diameter, pump head size and filling volume should be confirmed.
What samples should be provided?
Bottle samples, pump heads or caps, liquid sample, label roll and target speed information are recommended.
Custom Proposal
Request QuoteNeed A Machine Configuration?
Send your bottle, cap, label, liquid and target speed. ZXSMART engineers can recommend filling, capping and labeling equipment for your project.
Reference Engineering
Lotion And Cream-Lotion Reference Configuration
The reference route uses viscosity-capable filling and sample-matched pump or screw-cap handling. Final selection depends on the actual lotion, container and closure.
| Engineering area | Reference choice | What must be confirmed |
|---|---|---|
| Filling | Servo piston filling | Confirm viscosity, filling volume, anti-drip behavior and cleaning method. |
| Cap handling | Pump-head feeding and placing or screw capping | The actual closure sample defines orientation, placement and tightening. |
| Bottle format | Round or flat pump bottles | Bottle stability and neck geometry affect conveyor guides and positioning. |
| Labeling | Round or flat bottle labeling | Select from bottle shape, label size and required label position. |
Format and cleaning review
Required formats, change parts, recipe handling and cleaning steps are defined. Unspecified changeover times are not published.
Acceptance and handover
Samples, sustained output basis, inspection points, test duration, documents and training are agreed before the factory test.