Layout release
Power, compressed air, line direction, conveyor height, operator access and available footprint are confirmed before the general arrangement is approved.
Pesticide and agrochemical packaging requires careful material selection, corrosion resistance, reliable cap tightening and stable labeling for chemical bottle production.
Pesticide, agrochemical and plant protection liquid bottles
Chemical bottles requiring anti-corrosion contact parts
Round or flat bottles with screw caps
Lines requiring filling, capping, labeling and coding
Use this table to confirm the main configuration before requesting a quotation.
| Area | Recommended Choice | Why It Matters |
|---|---|---|
| Filling | Anti-corrosion filling or customized pump filling | Selected by liquid concentration and compatibility |
| Contact Material | PP, PTFE or corrosion-resistant materials when required | Confirmed by liquid property and sample testing |
| Capping | Screw capping with suitable cap feeding | Confirm cap diameter and cap sealing requirement |
| Labeling | Side labeling or round bottle labeling | Selected by bottle shape and label size |
Please provide bottle size, bottle shape, cap type, liquid property, filling volume, label size, target speed and factory voltage. Photos or samples help engineers confirm the machine structure faster.
Send Bottle DetailsLiquid name, concentration, corrosion property, bottle size, cap type, filling volume and target speed are required.
It depends on the liquid. Anti-corrosion materials such as PP or PTFE may be needed for some chemicals.
Yes, labeling and coding can be connected after capping according to bottle and label samples.
For corrosive or special liquids, sample testing and material confirmation are recommended before final configuration.
Send your bottle, cap, label, liquid and target speed. ZXSMART engineers can recommend filling, capping and labeling equipment for your project.
Material compatibility is the first engineering gate. The final liquid-contact parts, filling method and closure system are approved only after product data and samples are reviewed.
| Engineering area | Reference choice | What must be confirmed |
|---|---|---|
| Filling | Anti-corrosion or sample-matched pump filling | Select from liquid concentration, compatibility, filling range and product behavior. |
| Contact material | PP, PTFE or other confirmed corrosion-resistant materials when required | Material selection is confirmed from the buyer's product information and tests. |
| Capping | Screw capping with suitable cap feeding | Confirm cap dimensions, sealing requirement, orientation and bottle support. |
| Labeling | Side or round bottle labeling | Select from bottle shape, label dimensions and required position. |
Power, compressed air, line direction, conveyor height, operator access and available footprint are confirmed before the general arrangement is approved.
Required formats, change parts, recipe handling and cleaning steps are defined. Unspecified changeover times are not published.
Samples, sustained output basis, inspection points, test duration, documents and training are agreed before the factory test.